Nortel CallPilot Install Manual page 201

10
11
12
13
14
15
16
17
18
Copyright © 2007, Nortel Networks
.
Figure 111
Disable Rule
Result: The Confirm Disable of Rule window appears.
Click Yes to confirm the disabling of the rule.
Navigate to D:\Nortel\HA folder.
Launch HighavailabilityConfigurationWizard.exe.
Result: The High Availability Configuration Wizard appears.
Click the Reset button in the High Availability Configuration Wizard.
Note: Do not close High Availability Configuration Wizard at
this time. If you close High Availability Configuration Wizard,
you must reenter the data requested by the High Availability
Configuration Wizard.
Click Step 1: Get Node Information.
Click Step 2: Validate Node Information.
Result: The Stage 1 Complete window appears if there are errors.
On the Stage 1 Complete window, click OK.
Close the High Availability Configuration Wizard.
Result: The Confirm Exit Request window appears.
Click Yes.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
EMC AutoStart Agent and Console 201