Nortel CallPilot Install Manual page 173

22
23
24
Copyright © 2007, Nortel Networks
.
a. In the AutoStart Console, select the [AutoStart_Domain] >
Data Sources.
b. Right-click the drive you want to connect.
c. Select Attach Data Source.
On CP2, use the Windows Service utility to manually start the
following CallPilot services individually and in the following order:
• Adaptive Server Anywhere - DB_SQLANY
•
CallPilot HAL Monitor
• CallPilot LDAP
• CallPilot AOS (Enable the CallPilot AOS service first)
• CallPilot Multimedia Volume 1
• CallPilot Multimedia Volume 102
•
CallPilot Multimedia Volume 103
• CallPilot Multimedia Cache
Move the dongle to CP2.
Run the CallPilot Configuration Wizard to change the switch
configuration to match the switch settings.
Result: The Configuration Wizard unloads the CallPilot Database
tables again (which were previously unloaded).
a. On the main CallPilot Manager screen, click the Configuration
Wizard icon.
Tip: You can also start the Configuration Wizard by clicking
Tools > Configuration Wizard.
Result: A dialog box appears, prompting you to choose either
an Express or Standard setup.
b. Select OK to dismiss the dialog box.
Result: The Configuration Wizard: Configuration Mode screen
appears.
c. Select the CallPilot System Configuration (Standard Mode)
option and then click Next.
Result: The Configuration Wizard: Welcome screen appears.
d. On the Welcome screen, click Next.
Result: The Keycode and serial number screen appears.
e. Verify your Serial number and Keycode.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
CallPilot Configuration Wizard 173