Configure Cp2 Using The Configuration Wizard - Nortel CallPilot Install Manual

Feature Expansion: Adding the High Availability feature to an existing CallPilot 5.0 1005r server 275
22
23
24
25
Configure CP2 using the Configuration Wizard
Configuring CP2 using the Configuration Wizard
Step
1
Copyright © 2007, Nortel Networks
.
Click OK to configure CallPilot.
Result: The configuration is applied to the server. This task can
take from 5 to 10 minutes to complete, depending on the number of
languages installed and the number of programmed DSP cards. The
Configuration Wizard displays progress information.
After the configuration is applied to the server, a dialog box reminds
you to restart the server for the configuration to take effect.
Click OK to dismiss the dialog box.
Result: The system returns you to the main CallPilot Manager
screen.
Log off CallPilot Manager and close the Web browser.
Restart CP1.
Action
On the new CallPilot 1005r server (CP2), log on to CallPilot Manager:
a. When the Windows log on screen appears, log on with the
current password.
b. Launch Internet Explorer.
c. Enter http://<server name or IP address>/cpmgr in the URL
address box.
Result: The CallPilot Manager Logon Web page appears.
d. Log on using your existing CallPilot logon information. Enter
information into the following:
• Mailbox Number—Enter your existing mailbox number
(000000).
• Password—Enter your existing password for mailbox
000000.
• Server—Specify the name or the IP address of the CallPilot
server that you want to configure. (The server name may
have changed during the upgrade or platform migration.)
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—