Nortel CallPilot Install Manual page 44

44 Chapter 5 Install and configure the High Availability pair
Running the CallPilot Setup Wizard
Step
The CallPilot Setup Wizard must be run on both CP1 and CP2.
1
2
Copyright © 2007, Nortel Networks
.
Action
Log on to the CallPilot server.
The default password for the administrator account is Bvw250.
Result: When you first log on to the system after powering it up, the
Setup Wizard runs automatically. If the Setup Wizard does not open,
launch the Setup Wizard by clicking Start > Programs > CallPilot >
Setup Wizard.
Result: The Welcome to the CallPilot Setup Wizard window
appears.
Figure 3
CallPilot Setup Wizard: Welcome window
Click Next.
Result: The Service Update (SU) / PEP Installation window appears.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—