Nortel CallPilot Install Manual page 170

170 Chapter 6 Maintaining a High Availability system
14
15
16
17
18
19
Copyright © 2007, Nortel Networks
.
Perform step 4 of the High Availability Configuration Wizard. For
more information, see
Configuration Wizard to check CP1 and CP2 configuration" (page
75).
Import the new definition file on the AutoStart Console.
For more information, see
(page 196).
Update the AutoStart Utilities logon information (that is, update
the passwords for each utility as a result of reimporting the new
definition file).
On CP1, use the Windows Service utility to manually start the
following CallPilot services individually and in the following order:
• Adaptive Server Anywhere - DB_SQLANY
• CallPilot HAL Monitor
•
CallPilot LDAP
• CallPilot AOS (Enable the CallPilot AOS service first)
• CallPilot Multimedia Volume 1
• CallPilot Multimedia Volume 102
• CallPilot Multimedia Volume 103
• CallPilot Multimedia Cache
Move the dongle to the CP1 server (if the dongle is not already on
the server).
Run the CallPilot Configuration Wizard to change the switch
configuration to match the switch settings.
Result: The Configuration Wizard unloads the CallPilot Database
tables again (which were previously unloaded).
a. On the main CallPilot Manager screen, click the Configuration
Wizard icon.
Tip: You can also start the Configuration Wizard by clicking
Tools > Configuration Wizard.
Result: A dialog box appears, prompting you to choose either
an Express or Standard setup.
b. Select OK to dismiss the dialog box.
Result: The Configuration Wizard: Configuration Mode screen
appears.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
"Running Stage 1 of the High Availability
"Importing the AutoStart Definition file"