Nortel CallPilot Install Manual page 243

12
13
14
15
16
17
18
19
20
21
22
23
Use the following procedure to create a scheduled archive backup.
Copyright © 2007, Nortel Networks
.
Enter a Share name for the shared folder.
Write down the name of this shared folder as it is used in a later step.
Under Groups or User Names, select Everyone.
Under Permissions for Everyone, select the Allow check box for
the Read row.
Click OK.
Result: The Permission for Devices window closes and the
Properties window for the Devices folder appears.
Click OK.
Result: The Devices Properties window closes.
On CP2 (the standby server), right-click My Computer and select
Map Network Drive.
Result: The Map Network Drive window opens.
Select an available Drive letter.
In the Folder field, map the shared folder (D:\Nortel\Data\backup\De-
vices) on CP1 by entering the following:
\\<Computer name of CP1>\<Share name of D:\Nor-
tel\Data\backup\Devices on CP1>
Click OK.
On CP2, from the mapped drive that was just created, copy
the new <Device Name>.dev file you just created on CP1 to
D:\Nortel\Data\backup\Devices folder on CP2 (the standby server).
On CP2 (the standby server), right-click My Computer and select
Disconnect Network Drive.
Result: The Disconnect Network Drives window opens.
Select mapped network drive and click OK.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—
Support 243