REP 91.23 Front and Rear Track Guide
Parts List on
PL 94.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1.
Remove the IOD assembly,
REP
91.22.
2.
Remove the front track guide,
Figure
1
Remove 2 gold screws.
Figure 1 Front track guide removal
Repairs/Adjustments
REP 91.23
WARNING
GP
14. Disconnect the power cord
WARNING
1.
2
Remove the front track guide
from behind the front bracket.
3.
Remove the drum and abatement fan assembly from the rear of the machine,
Figure 2 Drum and abatement fan removal
February 2013
4-356
1
Disconnect harnesses.
2
Remove the screw then the
drum and abatement fan
assembly.
ColorQube® 9303 Family
Figure
2.