Xerox ColorQube 9303 Series Service Manual page 960

REP 12.61-171 BM Module
Parts List on PL 12.145.
Removal
Mandatory safety warning. This procedure must be performed by 2 people. The module
is heavy.
Do not undock the HVF BM from the machine. The HVF BM is unstable when undocked
from the machine. Do not show the customer how to undock the HVF BM.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the top cover, then the rear cover,
Repairs/Adjustments
REP 12.61-171
WARNING
WARNING
WARNING
GP 14. Disconnect the power cord
WARNING
REP 12.1-171.
2. Figure 1, disconnect PJ562 and PJ559 from the BM PWB.
February 2013
4-202
2 1
Release the harness Disconnect PJ562 and
PJ559.
from the retainers.
Figure 1 Disconnect the PJs
ColorQube® 9303 Family