Table of Contents
Advertisement
REP 83.1 Horizontal Paper Path
Parts List on
PL 82.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1.
Open the front door and remove the inner cover,
2.
Open the left hand upper door,
PL
3.
Remove the horizontal paper path,
2
Remove the screws
4
Lift slightly and pull out the hori-
zontal transport
Figure 1 Remove the horizontal paper path
ColorQube® 9303 Family
WARNING
GP
14. Disconnect the power cord
WARNING
PL 81.11 Item
2.
70.30.
Figure
1.
1
Disconnect harness
on the rear frame
3
Lift the heat shield and hold in
the up position
Replacement
1.
Replacement is the reverse of the removal procedure.
2.
Hold the heat shield up. Locate the rear left hand 'V' slots on the horizontal transport with
the guide on the top of the marking unit. Holding the unit level slide back in. Do not force
it, try to align the transport location holes with the location pins and it should fall into place.
3.
Run the relevant diagnostic routines, refer to
February 2013
4-309
GP 37
Post Part Replacement Routines.
Repairs/Adjustments
REP 83.1
Advertisement
Chapters
Table of Contents
