Rep 12.31-171 Hvf Buffer Guide Assembly - Xerox ColorQube 9303 Series Service Manual

REP 12.31-171 HVF Buffer Guide Assembly

Parts List on PL 12.125.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the HVF front door, REP 12.1-171.
2. Remove the HVF top cover, REP 12.1-171.
3. Remove the HVF front cover, REP
4. Remove the HVF rear cover, REP 12.1-171.
5. Figure 1. At the rear of the finisher, disconnect the two PJs.
REAR VIEW
Figure 1 Disconnecting PJs.
ColorQube® 9303 Family
WARNING
WARNING
GP 14. Disconnect the power cord from the cus-
12.1-171.
1
Disconnect the
two PJs.
6. Figure 2. Remove the pivot screw.
7. Pass the PJs through the cut-out in the rear frame.
8. Withdraw the guide through the front opening.
Replacement
Position the spigot at the guide rear in the hole in the rear frame. The rest of the replacement
procedure is the reverse of the removal procedure.
February 2013
4-167
1
Remove the
pivot screw.
Figure 2 Pivot screw removal.
Repairs/Adjustments
REP 12.31-171