Adj 62.3 Carriage Motor And Scanner Drive Belt; Adj 62.4 Document Glass Registration Adjustment - Xerox ColorQube 9303 Series Service Manual

ADJ 62.3 Carriage Motor and Scanner Drive Belt

Parts List on PL 62.16
Purpose
To ensure the carriage motor will drive the capstan without strain or slipping.
Adjustment
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the DADH, REP 5.19.
2. Remove the scanner top cover, REP
3. Remove the carriage motor cover, (2 screws).
4. Perform the adjustment, Figure 1.
3
Tighten 3
screws
2
Adjust for 2 mm
movement
1
Loosen 3 screws
Figure 1 Carriage motor drive belt adjustment
5. Turn the capstan several turns to centre the scanner drive belt on the pulleys. Check the
play of the scanner drive belt and re-adjust if necessary.
ColorQube® 9303 Family
WARNING
62.2.
Capstan
Belt
Scan motor

ADJ 62.4 Document Glass Registration Adjustment

Parts List on PL 62.10
Purpose
To measure and adjust the image to paper registration.
Adjustment
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Go to dC609 Document Glass Registration.
February 2013
4-417
WARNING
GP 14. Disconnect the power cord. Electricity can cause
ADJ 62.3, ADJ 62.4
Repairs/Adjustments