Figure 12 Drum drive motor ground
Horizontal Paper Path
•
Figure
13, horizontal paper path internal ground. Remove the horizontal paper path,
83.1. Remove the top cover, refer to
between the solenoids, sensor cover and the horizontal paper path ground contact. To
improve continuity, clean the contact faces and connections of the ground leads.
ColorQube® 9303 Family
Motor case ground wire.
Connects to PSU at PJ6AC.
REP
83.2. Check for continuity of less than 10 Ohms
Sensor cover ground
contact
REP
Figure 13 Horizontal paper path ground
Exit transport
•
Figure
14, exit transport internal ground lead. Remove the exit module,
Check for continuity of less than 10 Ohms between the solenoid, baffle and the ground
contacts. To improve continuity, disconnect the terminals, clean the contact faces, re-
install.
February 2013
6-29
Solenoid ground contacts
Horizontal paper path
ground contact.
General Procedures/Information
REP
10.20.
GP 7