Rep 12.43-171 Hvf Booklet Entrance Roll - Xerox ColorQube 9303 Series Service Manual

7. At the rear of the HVF, remove the buffer pocket roll. The bracket can be moved if neces-
sary, to improve access, (two screws),
Bracket
REAR VIEW
Figure 2 Buffer pocket roll removal.
Replacement
The replacement procedure is the reverse of the removal procedure.
Repairs/Adjustments
REP 12.42-171, REP 12.43-171
Figure 2.
1
Remove the circlip.
2
Slide the pulley and the
bush along the shaft.
3
Slip the belt off the
pulley.
4
Remove the pulley and
the bush.
5
Remove the buffer
pocket roll.

REP 12.43-171 HVF Booklet Entrance Roll

Parts List on PL 12.130.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the HVF front door,
2. Remove the HVF top cover,
3. Remove the HVF front cover,
4. Remove the HVF rear cover,
5. Figure 1. Remove the circlip and bush at the outboard end of the roll.
Figure 1 Circlip and bush removal.
February 2013
4-180
WARNING
WARNING
GP 14. Disconnect the power cord from the cus-
REP 12.1-171.
REP 12.1-171.
REP 12.1-171.
REP 12.1-171.
1
Remove the circlip
and the bush.
ColorQube® 9303 Family