Xerox ColorQube 9303 Series Service Manual page 952

REP 12.56-171 BM Right Hand Cover
Parts List on PL 12.185.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the top cover, then the rear cover,
2. Open the BM front door and fully pull out the BM module.
3. Remove the crease blade knob (6d),
4. Remove the crease roll handle (6c),
5. Remove the BM front cover, PL 12.150 Item
6. Figure 1, remove the BM top cover.
Figure 1 Top cover removal
Repairs/Adjustments
REP 12.56-171
WARNING
WARNING
GP 14. Disconnect the power cord from the cus-
REP 12.1-171.
PL 12.150 Item 4.
PL 12.150 Item 5.
3.
1
Disconnect the
harness to the
BM entry sensor.
2
Remove 2 screws
then lift and remove
the cover.
Replacement
Reverse the removal procedure to replace the BM right hand cover.
February 2013
4-194 ColorQube® 9303 Family