Xerox ColorQube 9303 Series Service Manual page 979

REP 12.75-171 Bin 1 Limit Switches
Parts List on PL 12.105.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the HVF rear cover, REP 12.1-171.
ColorQube® 9303 Family
WARNING
WARNING
GP 14. Disconnect the power cord
2. Disconnect the PJs and remove the upper or lower limit switch and bracket as required,
Figure 1.
1
Remove the screw and then
remove the upper limit switch.
2
Remove the screw and then
remove the lower limit switch.
Replacement
Reverse the removal procedures to replace the Bin 1 upper and lower limit switches.
February 2013
4-221
Figure 1 Bin 1 Limit Switches
REP 12.75-171
Repairs/Adjustments