9.
Figure
4. Remove the top exit feed roll.
1
Remove the
magnet bracket.
Figure 4 Top exit feed roll removal.
Replacement
The replacement procedure is the reverse of the removal procedure.
Repairs/Adjustments
REP 12.47-171, REP 12.48-171
REP 12.48-171 Compiler Paddle Motor Assembly
Parts List on
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the rear cover
2.
Remove the paddle motor assembly,
2
Remove the top
exit feed roll.
3
Remove the Paddle Motor.
Replacement
Reverse the removal procedures to replace the compiler paddle motor assembly.
February 2013
4-186
PL 12.120
WARNING
WARNING
GP
REP
12.1-171.
Figure
1.
Figure 1 Paddle Motor Assembly
14. Disconnect the power cord
1
Disconnect the motor
PJ.
2
Remove the 2 bracket
screws.
ColorQube® 9303 Family