Xerox ColorQube 9303 Series Service Manual page 981

REP 12.78-171 Tri Folder Entry and Assist Gate Sensors
Parts List on PL 12.215.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Undock the tri folder unit from the HVF,
2. Disconnect the PJs and remove the entry and assist gate sensors,
Assist gate sensor
Entry sensor
LEFT SIDE VIEW
Figure 1 TF Entry and Assist Gate Sensors
Replacement
Reverse the removal procedures to replace the entry and assist gate sensors.
ColorQube® 9303 Family
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.73-171.
Figure 1.
REP 12.79-171 Tri Folder Exit Sensor
Parts List on PL 12.215.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the tri folder top cover,
2. Remove the exit sensor,
Replacement
Reverse the removal procedures to replace the exit sensor.
February 2013
4-223
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.67-171.
Figure 1.
1
Disconnect the harness and
remove the exit sensor.
Figure 1 Tri Folder Exit Sensor
REP 12.78-171, REP 12.79-171
Repairs/Adjustments