Rep 81.10 Bypass Tray Empty Sensor; Rep 81.11 Tray 5 Feed Sensor - Xerox ColorQube 9303 Series Service Manual

REP 81.10 Bypass Tray Empty Sensor

Parts List on PL 74.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the bypass tray upper left door cover,
2. Remove the tray empty sensor, Figure
2
Lift arm and remove sensor
Figure 1 Tray empty sensor
Replacement
Replacement is the reverse of the removal procedure.
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
PL 70.30 Item 14.
1.
1
Disconnect harness

REP 81.11 Tray 5 Feed Sensor

Parts List on PL 81.45
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the top cover, PL 75.60 Item
2. Prepare to remove the tray 5 feed sensor,
1
Disconnect the harness.
February 2013
4-297
WARNING
GP 14. Disconnect the power cord
WARNING
10.
Figure 1.
3
2
Lift the upper feed
Remove eight screws assembly top cover.
marked A.
Figure 1 Preparation
Repairs/Adjustments
REP 81.10, REP 81.11