Xerox ColorQube 9303 Series Service Manual page 908

7. Remove the belt clamp, Figure 2.
2
Remove the belt clamp.
Figure 2 Belt clamp
8. Use the allen key, PL 12.160 Item 9
12.165 Item 10.
9. Prepare to remove the shaft from the frame,
1
Move the shaft.
Figure 3 Preparation
10. Move the backstop assembly to the bottom of the BM assembly.
Repairs/Adjustments
REP 12.21-171
1
Remove 2 screws.
to remove the 2 screws and remove shaft support,
Figure 3.
Frame locator
2
Remove the E-clip.
11. Remove the shaft from the BM backstop assembly,
1
Remove the shaft through the
bottom of the BM assembly.
PL
12. Remove the BM backstop assembly,
1
Flex the belt upwards.
Figure 5 Remove the backstop assembly
Replacement
1. Reverse the removal procedure to replace the backstop assembly.
February 2013
4-150
Figure 4.
BM backstop assembly
Figure 4 Remove the shaft
Figure 5.
2 3
Rotate the BM backstop Slide the BM backstop under
into this position. the belt.
ColorQube® 9303 Family