Rep 3.2 Quad Wave Amp Pwb - Xerox ColorQube 9303 Series Service Manual

REP 3.2 Quad Wave Amp PWB

Parts List on PL 92.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Ensure that ESD procedures are observed during the removal and installation of the quad
wave amp PWB.
1. Remove the IME controller PWB, REP
Repairs/Adjustments
REP 3.2
WARNING
GP 14. Disconnect the power cord
CAUTION
3.1.
2. Remove the quad wave amp PWB,
2
Remove screws marked B then remove the PWB.
Figure 2 Quad wave amp PWB removal
Replacement
Replacement is the reverse of the removal procedure.
February 2013
4-26
Figure 2.
1
Disconnect PJs marked A.
ColorQube® 9303 Family