Xerox ColorQube 9303 Series Service Manual page 681

Table of Contents

Advertisement

X-Stitch Defect Checkout
Refer to
Figure
1.
Figure 1 X-stitch defect
Procedure
Perform
dC971
Head to Head Alignment Adjustment up to 3 times. Print
cation Test Pages after each adjustment. The test pages are good.
Y
N
Manually disable the IOD align calibration:
1.
Enter
dC131
NVM read/write NVM ID 490-41 and change value to 3.
2.
Enter
dC971
and start the routine.
3.
Enter
dC612
and print
TP 16
and check the identification test pages.
The test pages are good.
Y
N
Manually re-enable the IOD align calibration:
1.
Enter
dC131
NVM read/write NVM ID 490-41 and change value to 4.
2.
Enter
dC971
and start the routine.
3.
Enter
dC612
and print
TP 16
A
B
ColorQube® 9303 Family
TP 16
Stitch Identifi-
and check the identification test pages.
A
B
The test pages are good.
Y
N
Perform
dC914
head stitch adjust motors,
adjust motors run.
Y
N
Check the motion of the printhead X-axis drive motors,
and
PL 91.25 Item
Go to the
91-504-00, 91-505-00
X-axis drive motors run.
Y
N
Go to the
91-510-00, 91-511-00
Print
TP
16. Check the test pages for good alignment following motion testing.
If the defect remains, perform the following:
1.
Check for obstructions that block carriage and printhead motion.
2.
Check the stitch adjust and roll adjust motor lead screws,
21
and
PL 91.25 Item 21
3.
Clean the IOD, refer to
4.
Clean the drum, refer to
Perform
SCP 5
Final Actions.
Perform
SCP 5
Final Actions.
Print the colour bands test page,
Y
N
Go to the
Printhead Maintenance
If the stitch defect is still present, swap the print heads around to move the artifact to the
outside of the page.
Perform
SCP 5
Final Actions.
February 2013
3-35
Head to Head Alignment Test. Check the motion of the print-
PL 91.20 Item 4
and
PL 91.25 Item
5.
Printhead Stitch Motor Over Current RAP. The
X Axis Motor Over Current RAP.
for cracks. Install new components as necessary.
GP 27
Cleaning Procedure.
GP 27
Cleaning Procedure.
TP
26. The test page is good.
Checkout.
4. The
stitch
PL 91.20 Item 5
PL 91.20 Item
Image Quality
IQ 9

Advertisement

Table of Contents
loading

Table of Contents