3 tray motor ground
connection
Figure 18 3TM motor
•
Figure
19, tray 1 and 2 ground contact pad. To improve continuity, remove the tray and
clean the contact face. The tray must be elevated to check for continuity between the
metal tray and the ground pad. Check for continuity of less than 10 Ohm between the tray
and the ground pad.
General Procedures/Information
GP 7
Frame ground
connection
•
Figure
clean the contact faces. Check for continuity of less than 10 Ohm between the paper
transport shafts and the main frame.
February 2013
6-32
Ground contact pad
Figure 19 Tray 1 and 2 ground
20, tray 3 horizontal transport. To improve continuity, remove the transport and
ColorQube® 9303 Family