Xerox ColorQube 9303 Series Service Manual page 819

4. Remove the front plate, Figure 2.
1
Remove 4 screws
5
Remove the front plate.
Figure 2 Front plate removal
ColorQube® 9303 Family
4
Disconnect the front transfix flexure
encoder harness and remove the cover.
5. Prepare to remove transfix linkage and gear,
2
Remove 4
screws
3
Remove 2
1
screws.
Support the weight of the
transfix linkage and gear.
Refer to note.
2
Push the bearing out.
NOTE: The transfix linkage and gear is shown in
February 2013
4-61
Figure 3.
Figure 3 Preparation
Figure 5.
Repairs/Adjustments
REP 10.2