Table of Contents
Advertisement
Finisher (HVF) Tags
TAG:
V-001
CLASS:
2
NAME:
Modification to the inserter connector
PURPOSE:
Pin 3 (ground 24V) and pin 4 (24V) on the bulk head connector on the HVF for
the inserter unit are to close together and could be shorted.
On the HVF PWB, PJ703 pins 2 and 3 are changed position. On the Inserter
PWB, PJ 5 pins 2 and 3 are changed position. This changes the position of the
ground 24V.
KIT NUMBER:
-
PARTS LIST ON:
-
TAG:
V-002
CLASS:
5
NAME:
Lower paddle switch
PURPOSE:
Mod TAG002 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER:
-
PARTS LIST ON:
-
TAG:
V-003
CLASS:
5
NAME:
Guide hinge pin
PURPOSE:
Mod TAG003 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER:
-
PARTS LIST ON:
-
General Procedures/Information
Finisher (HVF) Tags, Post Process Inserter Tray 6
TAG:
V-004
CLASS:
5
NAME:
Ejector with removable paddle assembly
PURPOSE:
Allows replacement of Ejector paddle assembly without needing to replace
entire ejector.
KIT NUMBER:
-
PARTS LIST ON:
PL 12.110 Item
TAG:
V-005
CLASS:
5
NAME:
Three blade lower paddle.
PURPOSE:
Located in the paddle unit to improve the contact force on documents in the
ejector assembly.
KIT NUMBER:
-
PARTS LIST ON:
PL 12.115 Item 2
TAG:
V-050
CLASS:
5
NAME:
Restriction of Hazardous Substances (RoHS)
PURPOSE:
To identify RoHS compliant machines. Refer to
KIT NUMBER:
PARTS LIST ON:
February 2013
6-304
2,
PL 12.110 Item 22
GP
26.
ColorQube® 9303 Family
Advertisement
Chapters
Table of Contents
