Xerox ColorQube 9303 Series Service Manual page 971

REP 12.68-171 Tri-Folder Drive Assembly
Parts List on PL 12.205.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the HVF rear cover, REP 12.1-171.
2. Remove the tri-folder rear cover REP
3. Remove the tri-folder drive assembly,
Drive assembly
Figure 1 Drive assembly
4. If necessary, remove the circlip then remove the drive coupler, refer to
ColorQube® 9303 Family
WARNING
WARNING
GP 14. Disconnect the power cord
12.67-171.
Figure 1.
Circlip
Drive coupler
1
Remove 2 screws.
2
Release the coupler
drive belt tension, then
remove the belt.
3
Remove 2 screws,
then the tri-folder drive
assembly.
Figure
Replacement
1. Detach the coupler alignment tool from the drive unit, refer to
2. Install the drive assembly,
2
Attach the drive assembly,
4 screws.
1.
February 2013
4-213
Figure
Figure 2.
1
Slide out the booklet
maker.
Figure 2 Attach the drive assembly
1.
Repairs/Adjustments
REP 12.68-171