Rep 4.2.1 Toner Empty Sensor - Xerox WorkCentre 5020 Service Documentation

REP 4.2.1 Toner Empty Sensor

Parts List on PL 4.2
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Remove the Drum Cartridge (REP 4.1.1).
2. Remove Tray 1.
3. Remove Tray 2 (REP 11.1.1).
4. Disconnect the connector (Figure 1).
1 Release the wire harness from the clamp.
2 Disconnect the connector.
Repairs and Adjustments
REP 4.2.1
WARNING
Figure 1
5. Remove the Toner Empty Sensor (Figure 2).
1 Release the tabs (2) to remove the Toner Empty Sensor.
July, 2007
4-20
Figure 2
Initial Issue
WorkCentre 5020