Installing The Mx10008 Into A Rack; Mounting An Mx10008 In A 4-Post Rack Using A Mechanical Lift - Juniper MX10008 Hardware Manual

Installing the MX10008 into a Rack

IN THIS SECTION

Mounting an MX10008 in a 4-Post Rack Using a Mechanical Lift | 143

Manually Mounting an MX10008 in a 4-Post Rack | 147
Mounting an MX10008 in a 4-Post Rack Using a Mechanical Lift
Because of the router's size and weight, we strongly recommend using a mechanical lift to install the
MX10008.
NOTE: For instructions on installing a router without using a mechanical lift, see
an MX10008 in a 4-Post Rack" on page
CAUTION:
securely on a rack or cabinet.
CAUTION:
technician verify that the rack or cabinet is strong enough to support the router's weight
and is adequately supported at the installation site.
Before you install the router:
Prepare the site for installation as described in
Ensure the site has adequate clearance for both airflow and hardware maintenance as described in
"MX10008 Clearance Requirements for Airflow and Hardware Maintenance" on page
Unpack the router as described in
147.
Do not install line cards in the chassis until after you mount the chassis
Before front-mounting the router on a rack or cabinet, have a qualified
"MX10008 Site Preparation Checklist" on page
"Unpacking the MX10008" on page
"Manually Mounting
91.
98.
132.
143