Installing The Mx240 Router; Tools Required To Install The Mx240 Router Without A Mechanical Lift - Juniper MX240 Hardware Manual

Table 92: Accessory Box Parts List (continued)
Part
Document sleeve
3 in. x 5 in. pink bag
9 in. x 12 in. pink bag, ESD
Accessory box, 19 in. x 12 in. x 3 in.
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP,
Category 5E, 15'
ESD wrist strap with cable

Installing the MX240 Router

IN THIS SECTION
Installing the MX240 Router Mounting Hardware for a Rack or Cabinet | 217
Moving the Mounting Brackets for Center-Mounting the MX240 Router | 219
Tools Required to Install the MX240 Router with a Mechanical Lift | 220
Removing Components from the MX240 Router Before Installing it with a Lift | 220
Installing the MX240 Router By Using a Mechanical Lift | 225
Reinstalling Components in the MX240 Router After Installing it with a Lift | 227

Tools Required to Install the MX240 Router without a Mechanical Lift | 231

Removing Components from the MX240 Router Before Installing it without a Lift | 231
Installing the MX240 Chassis in the Rack Manually | 237
Reinstalling Components in the MX240 Router After Installing it without a Lift | 239
Quantity
1
2
2
1
1
1
216