Pri Attributes; Pri Mode - Bay Networks NauticaRS Reference Manual

PRI Attributes

117237-E Rev.00
This option is not available on the Nautica CLAM or Nautica 200.
Using a Primary Rate Interface (PRI) gives you up to 30 channels
into the Nautica router you are using. These channels are mapped
to ISDN ports.
It is possible to use your PRI card to create WAN ports instead of
ISDN ports. Using your PRI in fractional mode allows you to
specify which channels you want attached to which WAN port,
thus increasing the amount of information that can be passed
through an individual WAN port.
Select the operational mode for your PRI card:

PRI Mode

PRI Mode
To edit a PRI device, use the following syntax:
[co] [mod] dev pri/isdn-prinn
where co takes you into config mode (if required); mod is the
MTD for the modify verb (optional); dev takes you into the
device object; pri is the device type and isdn-prinn is the number
of the PRI device being edited.
The BCC prompt changes to show that you are editing the PRI
device:
device/pri/isdn-pri01#
Nautica Devices
Fractional Mode
6-31