Calling A Remote Path - Bay Networks NauticaRS Reference Manual

path/ppp/RemotePPPSite# isdn-n 2/01234567890
117237-E Rev.00
After you are in the path object, typing
attributes. To change an attribute, use the following syntax:
Attribute New_Value
where Attribute is the name of the attribute to change and
New_Value is the new option for the attribute.
To add a new ISDN number to the path, for example, the
following would be typed:
In this instance, isdn-n 2/ is the MTD for the
attribute and 01234567890 is the new value to be assigned to this
attribute.
For more information on path attributes, refer to Appendix A.

Calling a Remote Path

Calling a remote path can provide your router with more
information. To call a unit, use the following MTC:
call isdn-number
or
call pathname
where pathname name of the path. For example, if the remote
Path has an ISDN-number of 123456, the following would be
typed:
box# call 123456
or you can call the path directly:
box# call remotenautica
Configuration Options
lists all the path
i
isdn-number 2/
3-17