NauticaRS 5.5R Reference Guide
Modifying System Parameters
5-4
To modify a system parameter, in the system# object, use the
following syntax:
[mod] parameter newvalue
where mod is the MTD for the modify verb (Appendix A),
parameter is the name or MTD of the parameter to change and
newvalue is the new value for the parameter.
While using mod is not necessary, its use can save you mistyping
commands and creating new objects in error. Until you are used to
the BCC, it is recommended that you precede all parameter
change commands with the mod verb.
In the table below, click on the parameter for which you require
further assistance.
name
mgr-timeout
beep-on-new-alarm
blacklist-timeout
advanced-manager
pptp-enable
bootp-relay-enable
syscontact
public-community
snmp-trap-addr-1 to 4
log-local
password
fp-enable
beep-on-isdn-call
secure-unit
html-manager
dhcp-enable
bootp-relay-server
syslocation
private-community
syslog-host
disable-autocalls
117237-E Rev.00