The Wan Device; Synchronous Wan Attributes - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

The WAN Device

6-58
A Nautica router supports three different WAN types, depending
on its mode setting. Select the mode you require from the list
below.

Synchronous WAN Attributes

Asynchronous WAN Attributes
Frame Relay WAN Attributes
Synchronous WAN Attributes
To edit a WAN device, use the following syntax:
[co] [mod] dev wan/wan01
where co takes the router into config mode (if required); mod is
the MTD for the modify verb; dev takes the BCC into the device
object; wan is the device type and wan01 is the number of the
WAN device being edited.
After you have edited the device, the prompt changes to show you
are inside the device object:
device/wan/wan01#
Typing i here lists all the attributes that can be changed for the
device.
In the table below, click on the device for which you require
further assistance.
type
ident
State
mode
speed
ptype
ppp-profile
117237-E Rev.00