Dns Global Settings - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

DNS Global Settings

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
19-2
Before you can use the DNS Proxy, it is important to ensure that it
is set up on your router. To enable DNS Proxy you need to move
into the dns# object and check that DNS is enabled on the router.
To move into the dns# object, use the following syntax:
[co] dn
Where co moves BCC into config mode (if required) and dn is the
MTD for the dns# object.
Typing i at the dns# object prompt lists the DNS Global
parameters. In the table below, click on the parameter for which
you require further assistance.
enabled
enabled
en
enabled
enabled, disabled
Allows or disallows the DNS Proxy.
Only de-select this option if you want to stop the DNS
proxy from working.
max-cache-entries
117237-E Rev.00