Radius Attributes - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

RADIUS Attributes

14-2
RADIUS does not consist of configured objects as with many
other contexts, but rather a list of attributes that are amended by
the user.
Enabling the Radius options within the Nautica allows it to
operate as a Network Access Server (NAS) in a secure network. A
NAS receives incoming call requests and then relays them to a
RADIUS Server for authentication. Once authenticated the
connection is made and data transfer can take place.
Your Nautica router can operate with most standards based
servers but to enable the extra Nautica specific features (dynamic
configuration download, outgoing calls etc.) it must be used in
conjunction with the Nautica RADIUS Server.
Note: For totally secure operation when used with a Nautica
RADIUS Server, permanent paths, routes and filters should not
be configured. These parameters will be downloaded from the
server once the authentication stage has completed.
Move into the RADIUS context by typing the following at any
configuration prompt:
[co] ra
Where co moves BCC to config mode (if required) and ra is the
MTD for RADIUS.
The prompt changes to show that you are now in the RADIUS
object. Typing i at the radius# object prompt lists all the RADIUS
parameters.
117237-E Rev.00