NauticaRS 5.5R Reference Guide
The Voice Device
6-8
Voice ports are not available on all Nautica routers. To edit a voice
device, use the following syntax:
[co] [mod] dev voice/voicenn
Where co is the MTC to move you into config mode (if required);
mod is the MTC for the modify command (optional); dev moves
you to the device object; voice is the device type and
the name of the voice port, for example voice01.
When you have entered the voice object, the prompt changes to
show that you are in the device object, for example:
device/voice/voice01#
Typing i (MTD for the info command) at this prompt lists all the
parameters for the device.
In the table below, click on the parameter for which you require
further assistance.
type
ident
state
connmode
resbchan
ringcadence
sel1
cadence2
sel2
rfreq
voiceservices
bumpdatain
cli1bump
cli2bump
bumpdataout
clipmode
ton
npi
117237-E Rev.00
is
voicenn