Access-Request Attributes - Bay Networks Remote Annex User Manual

User-Name
User-Password
CHAP-Password
NAS-IP-Address
NAS-Port-Type

Access-Request Attributes

ERPCD/ACP sends Access-Request packets which indicate how the user
connects to the Annex. This information is used by the server as a hint
or a restriction. The following section defines the available access-request
attributes:
Indicates the name of the user that the RADIUS server will authenticate.
An unterminated ASCII string identical to the user name that ERPCD/
ACP retrieves via the user name prompt. You can specify up to 31
alphanumeric characters.
Specifies the user password that the RADIUS server will authenticate.
Specifies the response value of a CHAP user in response to the password
challenge.
Indicates the IP address of the Annex authenticating the user or sending
an Accounting packet.
Specifies the Remote Annex port handling the user session. This value
corresponds to the physical port type. Supported port types:
• Async (0)
• ISDN Sync (2)
• ISDN Async V.120 (3)
• Virtual (5)
Remote Annex Server Tools for Windows NT
Chapter 4 Using Security Features
®
User Guide
4-13