NauticaRS 5.5R Reference Guide
Frame Filters
12-2
Nautica routers allow you to filter frames. The filters are grouped
into profiles, and each profile can contain up to 99 different
filters.
Frame filters can be added or edited from any config location in
BCC, but they are stored in the bridge# object. Initially there are
no frame filters set up on your router.
To view the bridge object and list any filters that may be set up, at
any prompt type the following:
[co] br ls -l
where co moves the BCC into config mode (if necessary), br is
the MTD for the bridge# object and ls -l lists all the objects. An
example of this follows:
bcc> co br ls -l
filter/1/1
filter/1/2
filter/2/1
filter/2/2
filter/2/3
stp
bridge#
Figure 12-1.
Frame Filter Listing
117237-E Rev.00