Viewing The Standard Profiles - Bay Networks NauticaRS Reference Manual

Viewing the Standard Profiles

117237-E Rev.00
Although it is not possible to modify or delete the default profiles,
you can view their parameters. To display profile attributes, use
the following syntax:
[co] [mod] pr profile-name
Where co takes the router into config mode (if required), mod is
the modify verb (optional), pr is the MTD for the profile object
and profile-name is the name of the default profile you want to
view.
For example, to view the attributes for the default PAP profile, at
the ppp# prompt, type the following command:
ppp# mod pr pap
The BCC moves you into the profile and the prompt will change
to reflect this:
profile/pap#
Typing i at this prompt lists all the PAP profile attributes and their
settings. In the table below, click on the parameter for which you
require further information.
name
chap-enable
mru
echo-timeout
short-seq-enable
Using PPP Profiles
pap-enable
auth-enable
restart-timeout
mlink-enable
frag-enable
8-3