Access-Request Attributes - Bay Networks Remote Annex User Manual

Chapter 4 Using Security Features
User-Name
User-Password
CHAP-Password
NAS-IP-Address
NAS-Port-Type
4-12
Remote Annex Server Tools for Windows NT

Access-Request Attributes

ERPCD/ACP sends each Access-Request packet indicating how the user
has connected to the Annex. This information can be used by the server
as a hint or a restriction. The following section defines the available
access-request attributes:
Indicates the name of the user that the RADIUS server will authenticate.
An unterminated ASCII string identical to the user name that ERPCD/
ACP retrieves via the user name prompt. You can specify up to 31
alphanumeric characters.
Specifies the password of the user that the RADIUS server will
authenticate.
Specifies the response value provided by a CHAP user in response to the
password challenge.
Indicates the IP address of the Annex authenticating the user or sending
an Accounting packet.
Specifies the Remote Annex port handling the user session. This value
corresponds to the physical port type. Supported port types:
• Async (0)
• ISDN Sync (2)
• ISDN Async V.120 (3)
• Virtual (5)
®
User Guide