NauticaRS 5.5R Reference Guide
18-4
Area 0 Path
The path linking the ABR and Area 0 can have any relevant Path
Type (see Chapter 7), but several attributes must be set on the
OSPF path:
Set this parameter To...
RIP-SUPPORT
OSPF-SUPPORT
OSPF-Area
Additional Area Path
The path linking the ABR to an additional area can have any
relevant Path Type (see Chapter 7), but several attributes must be
set:
Set this parameter To...
RIP-SUPPORT
OSPF-SUPPORT
OSPF-Area
page
7-8)
none (
ospf2
(OSPF
Paths)
0
(OSPF
Paths)
page
7-8)
none (
ospf2
(OSPF
Paths)
not 0
(OSPF
Paths)
Reason
OSPF does not
need RIP support.
To enable OSPF on
the path.
To define the area
into which the path
is connected.
Reason
OSPF does not
need RIP support.
To enable OSPF on
the path.
To define the area
into which the path
is connected.
117237-E Rev.00