Ospf Paths - Bay Networks NauticaRS Reference Manual

OSPF Paths

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
OSPF is set up on individual paths. To display all the OSPF
settings, the advanced-manager parameter in the system# object
must be set to yes:
bcc> co sy adv yes
With the advanced-manager enabled, the additional OSPF
parameters are available on the paths. These parameters are
displayed by modifying or creating a path and then using the i
command to list the path parameters.
The following example shows how to turn the advanced-manager
on and then move into an existing PPP path called central.
bcc> co sy adv yes
[Save] system# pa ppp/central
[Save] path/ppp/central#
In the table below, click on the OSPF Path parameter for which
you require further assistance.
ospf-support
ospf-hello-time
ospf-priority
ospf-support
ospf-s
none
none, ospf2
Enables or disables OSPF on this path.
If OSPF is to be used on this path, change this parameter
to OSPF2.
Working with OSPF
ospf-metric
ospf-dead-time
ospf-area
18-5