The Wins Configured Object - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

The WINS Configured Object

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
16-2
Before WINS can be used on your Nautica router it needs to be
enabled. To do this you must move into the wins# object using the
following syntax:
[co] wi
Where co moves BCC into config mode (if required) and wi is the
MTD for WINS.
BCC moves into the WINS object. Typing i at this object prompt
lists the parameters for the WINS object itself. In the table below,
click on the parameter for which you require further information.
enabled
enabled
en
no
no, yes
Enables or disables WINS on this router.
Amend this parameter as necessary.
max-entries
max-e
100
A number from 0 to 1000
Sets a limit on the number of WINS entries the router
can learn. This is useful in smaller routers where
memory might be a problem.
Enter the maximum number of entries to be used on this
router.
max-entries
117237-E Rev.00