Bcc Help Options; Using The Help Command; Figure 2-8. Attribute Help - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

BCC Help Options

ip# help
Attributes:
enabled: enable/disable IP
mode: route or bridge IP
filter: action of IP filters
cache-timeout: timeout of IP route cache (secs)
Classes:
filter ospf route
ip#
Figure 2-7.
ip# enabled?
enabled: enable/disable IP
Possible values are:
yes no
ip#
Figure 2-8.
2-16
There are several ways to get help at any prompt in the BCC. At a
prompt, typing ? or help displays a brief explanation of what
actions can be performed at this prompt.
For example, typing help at the IP class prompt causes the
following to appear:

Using the help Command

Here, help shows what attributes can be amended at this prompt,
and also the sub-classes that can be entered.
To get more specific help, perhaps on one of the attributes, type
the attribute followed by a ?.
For example, to display help on the IP Enabled attribute, the
following can be typed:
Attribute Help
117237-E Rev.00