Route Cache; Figure 9-3. Ip Route Table Cache - Bay Networks NauticaRS Reference Manual

Nortel nautica nauticars software: reference guide
Hide thumbs Also See for NauticaRS:
Table of Contents

Advertisement

NauticaRS 5.5R Reference Guide
Parameter:
Function:
Parameter:
Function:

Route Cache

DestinationGateway
2.2.2.15
0.0.0.0
Figure 9-3.
9-24
Destination
The destination host IP address
MAC Address
The physical MAC address of the device. If the entry is
blank, then the device is on a remote network. If the
address is 'aaaaaaaaaaaa', then an ARP request has been
sent but no response has been received yet. If the entry is
'ffffffffffff', this indicates a broadcast to the local LAN.
At the start of every routing request, the Nautica router performs a
'Lookup' in the routing table to determine the best route. Once a
route has been selected, the details of the route are held in the
route cache table. Entries in this table are re-evaluated every 15
minutes.
To change the time between cache flushes, amend the
cache-timeout
parameter in the ip# object.
To view the IP route table cache, type the following at any
prompt:
box# sh ip ca
A list similar to the following appears:
MAC Address
abcdef121212 789
IP Route Table Cache
Packets
Byte
209378 LAN01
Path
117237-E Rev.00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nauticars 5.5r

Table of Contents