NauticaRS 5.5R Reference Guide
Creating and Modifying MSNs
11-16
MSN is used to distinguish between different services attached to
the same ISDN line; for example, to differentiate between an
ISDN fax and a Nautica 200 on the same ISDN line, or between a
normal data call and a PPTP call.
There are no MSNs set up after the unit is first installed.
To create or modify an MSN use the following syntax:
[co] is [new|mod] ms number/service
where co moves the BCC into config mode (if required), is is the
MTD for the isdn# object, new and mod are the new and modify
verbs (optional), ms is the MTD for MSN, number is the
telephone number associated with a service and service is the
option the telephone number is matched against.
When you edit or create an MSN, the BCC moves into the MSN
object. Typing i at the object prompt lists all the parameters that
are available for the MSN.
In the table below, click on the parameter for which you require
further assistance.
number
dest
service
dov
117237-E Rev.00