Quick Setup Checks - Bay Networks NauticaRS Reference Manual

Quick Setup Checks

117237-E Rev.00
When Quick Setup is finished, a path called RemotePPP is
created if you answered y to the PPP question in the Quick Setup.
If you answered n to PPP, a path called RemoteNautica is created.
These are the paths by which you connect to the remote router
specified by an ISDN number during the setup procedure.
Note: The RemotePPP path may be automatically renamed if
the unit is CHAP challenged on the first call. When a
RemoteNautica path comes up for the first time, the name is
always changed automatically.
To view these paths in config mode type:
box# ls -l
where ls -l is the MTD for the lso -l command (Appendix A).
Remember to precede the command with the co command if you
start at the bcc> prompt (BCC mode).
Using ls -l causes a list of all the objects to appear.
bcc> co lso -l
device/box/Nautica4000
device/eth/LAN01
device/wan/WAN01
device/bri/ISDN-TA01
device/isdn/ISDN01
device/pri/ISDN-PRI01
path/eth/LAN01
path/nau/Central
path/ppp/RemotePPPSite
Configuration Options
3-15