NauticaRS 5.5R Reference Guide
IPSec Statistics
20-24
After an IPSec tunnel is initialised, statistics can be displayed for
all tunnels (IPSec and PPTP) currently running by typing:
bcc> sh tun
It is also possible to show the statistics for an individual IPSec
tunnel by typing the following command:
bcc> sh tun ipsec ipaddr
Where ipsec is the path type and ipaddr is the IP address at the
end of the IPSec tunnel.
The show tunnel command displays the following information:
Type
Remote
----------------------------------------------
IPSec
10.10.10.1 25.25.25.1
PPTP
10.10.10.3 25.25.25.2
In the table below, click on the parameter for which you require
further assistance:
Type
IP Addr
IP Addr
Remote
Name
Name
SecPath
PPTPPath
117237-E Rev.00