NauticaRS 5.5R Reference Guide
IPX Routing
Do you wish to run quick setup now?: n
Enter the name of this router (e.g., accountname):
Enter the IP Address for this router.:
3-10
To set the router up for IPX routing, after entering Setup the first
question you are asked is:
The default here is
Press enter.
Note:
This is the only time you can stop Quick Setup.
The next question is:
Enter here the name you wish your router to be known by or, if
you are connecting to the Internet via an Internet Service Provider
(ISP), enter the account name the ISP has given you.
Press enter.
Enter the IP address of your Nautica router or the IP address given
you by the ISP. Type in the address in the format
000.000.000.000/00 where /00 is the subnet mask you are using.
If you enter the address without a subnet mask, for example,
198.200.100.10/0 or 198.200.100/10, the router is set up for
single host addressing.
Single host addressing is used when your router is connecting to
an ISP. Press enter.
(for no); type
n
y
(for yes) to begin setup.
117237-E Rev.00