The Config Mode - Bay Networks NauticaRS Reference Manual

Understanding the Command Line
show, info and exit are command verbs. For more information on
command verbs, refer to Appendix A.
help is specific to the level at which you are working. For more
information on help, refer to page 2-16.

The config Mode

config mode is where you set all the parameters for your router. It
contains the various classes and objects and objects (page 2-13)
which in turn contain the parameters.
To enter config mode, at the bcc> prompt type:
bcc> co
where co is the MTD for the config command (page 2-5). After
the command is typed, press the enter key.
The command line prompt changes to read:
box#
box# is the top level of the config mode; from here you can return
to the bcc> mode (by typing exit), or enter an object (page 2-13).
To see a list of all the classes, type ? at the box# prompt. The
following appears on the screen:
117237-E Rev.00 2-11