Logging Onto The Command Line; Figure 2-1. Telnet Connect Window - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Logging onto the Command Line

Figure 2-1.
2-2
The BCC can be accessed via a Telnet session across the LAN. To
connect to the router:
1. Open Telnet on your PC.
2. Click on Connect > Remote System.
3. The Connect window
Telnet Connect Window
4. As in Figure
the port and also the terminal type (generally vt100).
5. Click on the Connect button.
Alternatively, if you are using Nautica Wizard to configure your
router, a Telnet session can be opened by:
1. Opening Nautica Wizard.
(Figure
2-1, enter the IP address of the router, select
2-1) appears:
117237-E Rev.00